Hi

After a long long time of beeing abstinet of racing it's time to do it again.
My new car is nearly ready and if the weateher will be good I'm plannig to go to Kiskunlacháza
on Saturday.

Wanna See my new car??



So let me know how else will come

Drag or Die

MeXX 

Congngratulation Robi

4 Your 10.87@209

DoD MeXX 

Brakes are immportant!!!



MeXX 

Who would mind some wrinkels if a tire performs like this ???


MeXX 

How fast can U run with a 10.5 tire




Mexx 

should look like this:


MeXX 

Dear Falco

properly of the low compression it could be perfect 4 turbo application.
but its on juice now!!

DoD MeXX 

typ1
2595cm3
wbx chase
100 barels nikasil from Porsch 993 GT3
100 Mahle pistons from Porsch 993 GT2 Biturbo
custom Pauter roller cam
home built Competition Eleminator 51,5x41
kennedy clutch stage1 (228mm) Quatermaster disc 914 flywheel
52mm EFI
MSD dizzy+MSD Digital6+Blaster HVC II






8,9 :1
Dynoed 238 ponnies
plus 220 ponnies on Juice (sometimes)


10.5:1

 

Hi
what crank are U using ??
Why dont U use a 82 (2659ccm)
                     or a 84 (2724ccm)
                     or a 86 (2789ccm)
                     or a 88 (2854ccm)
                     or a 90 (2919ccm)
remember there is no replacement 4 displacement !!!  

Lookalike??


DoD MeXX 

Hi

Just reassemblin´ my mill ;
Should run tomorrow;
Thinkin´ of visitin´ this Meeting,
just have been asking friends if they´ll also
will come .

Soon more

so DoD

lookin´ forward MeXX 

Sorry

DoD 

That´s what a Renault is good 4
http://www.youtube.com/watch?v=XRXwWbo_mX0&mode=related&search=
DoD 

Ave

Very nice final results page with pics
congratulation !!!

BTW hop U enjoied DVD
PS  that guies make boost.

DoD 

What is FORD the shortform for ??

Fix Or Repair Daily

DoD 

Hi everybody

Wanna see a nice Ford mill ??
Here it comes:

nice ha??

DoD MeXX 

Hi Falco

Just bought 6 zylinders at Ebay for 112€ (5 for spare)
still have two spare pistons. So this mill will run soon again.
But it took some time; stopping my further development of my tube Ghia



But I will continue ...
BTW congraulation wellcome to the 10s club

DoD Mexx 

Hi

Just disassemled my mill
LOL


Hey Nitrous rules (ruins)!!

DoD MeXX 

DoD 

Hi AVE

Here comes a cool vertigate 4 U 

Hi folks

As it was one of the very first runs of Ali Afshar the setup was not nearly ready.
Although the track was in perfect contition; where FWD hondas were runnin´
1.40 60´ times and also Top Fuel cars were running, U can roughly estimate the powerrange
when it comes up to boost an loosin´ traktion.
Remember on 4!!! 10,5/28-15 M/T s on glued track.
Video commin´soon

check out

MeXX 

Hi folks

Yes it´s AWD and it runs on 10.5/28-15 M/T
the intercooler is an ice intercooler inside the car and it has amazingly long
piping
wana ses a small video from the runni´ engine
or from a run

let me know

So DoD 

Hi folks

Yes it´s AWD and it runs on 10.5/28-15 M/T
the intercooler is an ice intercooler inside the car and it has amazingly long
piping
wana ses a small video from the runni´ engine
or from a run
let me know

So DoD 

Thank U Mr Bluescreen. 

As I mentioned before it´s a new Ghia a coupe and it will be a full tube chassis car
for drag use only and it will run with an USA licenceplate.

So DoD MeXX 

Here it comes !!!!!!!!!

DoD 

wana see an interesting Scoobi ???
check it out: 

Ya it´s cheap easy avaliable very light and very good quality.
calipers are from Honda CB 1000 XX or Suzuki GSXR 1100
Rotors are BMW 1200 and Aprillia Mille
everything from Ebay

Here comes the best foto from SEMA:



DoD

 

Here comes a nice picture of my brake system wich is nearly finished
752g is the bigger rear rotor
792g is with pads !!!!

as I sad weight is my worst enemy !!!!!

MeXX 

Dear carlosracing

Sounds nice, but I would never use parts wich are made to Great British standard   .
I prefer wilwood btw my long time friend and hardcore racer Harry, who´s a real addicted
to British parts has swichted to wilwood   . But as weight is my worst enemy I used Tokico
this time were the 4 pot callipers weight 792g and the 276mm rotor 752g.
My target weight with driver and fuel is 1300 lb (4U) or 580 kg !!!!

So DoD MeXX
 

Howdy Falco

I´m very bussy with my new plan of building a tube chassis Ghia;
This time it´s a coupe and I have already chopped the roof and now I´m
already in building the rear quater panels out of carbon, and designing
the suspension and the rear axel will be ordered next week( it´ll be a Porsche
gearbox with a Ford 9" aluminum spool with 35 spline and aluminum yokes from Moser).
The design 4 the tube chassis is ready and the tubing and the flip front is on its way from
the USA, so are the custom made wheels and tires from M/T and some other parts
Today will try make a step forward with the brake system I´m building right now.

So let´s go back to work

DoD MeXX 

who can see the fastest dog on earth at 1:10 to 1:11
look very closely and U´ll find it  

what´s the problem of not getting the tires hooked up ??
or is the clutch engagement too harsh ??
or is it just why it is called Top Fuel ??

enjoy: www.youtube.com/watch%3Fv%3D27jyQL1Xejo%26mode%3Drelated%26search%3D  

6 minutes why we´re addicted to dragracing
http://www.myvideo.de/watch/75385


DoD 

congratulation perfect page !!!!

always DoD

MeXX 

How fast can U go on 10.5 M/T ?????
check out www.dragracingtv.com/scsn2006/drag-racing-video-clips-scsn06-outlaw-street-elims.html

DoD MeXX 

Hi Everybody

Don´t be shy to check out http://www.dragracingtv.com/vw-drag-racing.html

DoD MeXX